Scrubbing Bubbles® Power Stain Destroyer Toilet Bowl Cleaner

Remove rust and destroy 100% of limescale with our most powerful stain-fighting formula ever. Scrubbing Bubbles® Power Stain Destroyer Toilet Bowl Cleaner changes from green to blue as it powers through stains. Apply under the toilet rim and, after 15 minutes, just scrub the bowl, then flush to rinse. Sayonara rust and limescale, hello Rainshower® and Citrus scents – because with great power comes great fragrance options.

A powerful clean with an ever-so-delightful scent. That’s cleaning reinvented.

Available in Citrus and Rainshower® fragrances.


  1. Lift the toilet seat.

  2. To remove the cap, squeeze the two textured side surfaces and unscrew completely.

  3. Tip the bottle to fill the neck. Direct liquid under the rim and squeeze evenly around the bowl.

  4. To remove limescale and rust coat the bowl and allow to sit for 15 minutes. In case of very tough limescale and/or rust re-apply and leave

  5. Brush the entire bowl and flush .

  6. Replace cap and close tightly until an audible click is heard.

For stubborn stains, allow product to sit for more than 15 minutes.


  • toilet swatch


How To Use Power Stain Destroyer

WARNING: DANGER: CORROSIVE: Causes skin burns. Do not get in eyes, on skin, or on clothing. Wear personal protective equipment. If on skin: rinse immediately with plenty of water for at least 15 minutes. Seek medical advice. Remove and wash contaminated clothing before reuse. Corrosive: causes irreversible eye damage. Do not get in eyes. Use suitable eye protection. If in eyes: hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Seek medical advice. Harmful if swallowed. KEEP OUT OF REACH OF CHILDREN AND PETS. Never use or mix with other household cleaners as hazardous fumes may result.

See ingredients for this product.